Production
About our Enterprise » Products » Separator » Self-unloading separator

Self-unloading separator

            Self-unloading iron separators are intended for extraction of a large amount of ferromagnetic inclusions of medium and large size. Their working unit is a fixed electromagnet having a mechanism for automatic removal of ferromagnetic admixtures. The incorporated self-purification system allows the use of these iron separators at works with uninterrupted cycles. The main parameter of an iron separator is the extraction zone depth and the mass of extracted objects. The Table below gives their values for production samples.                            

 

     For dangerous and hazardous production processes it is possible to make iron separators according to dust-ignition-proof design or a design ensuring chemical protection (Compliance Certificate No. 7998150 РОСС RU.GB05.В02235 of 01.04.2008).   

 TYPE     

Design: width of the belt / extraction zone depth (cm)

Conveyor belt width, mm

Extraction zone depth above, mm

Mass of the extracted inclusions up to, kg

Power, kW

Mass, kg

EZHS-80 

 EZHS-80/17

 800

 170

 0,1-30

 1,40

 1150

 

 EZHS-80/20

 800

 200

 0,1-30

 2,00

 1250

 

 EZHS-80/28

 800

 280

 0,1-40

 2,60

 1650

 

 EZHS-80/35

 800

 350

 0,1-40

 2,80

 1800

EZHS-100

 EZHS-100/20

 1000

 200

 0,1-40

 2,10

 1600

 

 EZHS-100/30

 1000

 300

 0,1-40

 2,50

 1890

 

 EZHS-100/20

 1000

 350

 0,1-40

 3,30

 2250

 

 EZHS-100/20

 1000

 400

 0,1-40

 3,60

 2750

EZHS-120

 EZHS-120/25

 1200

 250

 0,1-40

 2,80

 2400

 

 EZHS-120/36

 1200

 360

 0,1-40

 4,50

 3200

 

 EZHS-120/50

 1200

 500

 0,1-40

 5,60

 3800

 

 EZHS-120/55

 1200

 550

 0,1-40

 7,00

 4100

EZHS-140

 ЭЖС-140/35

 1400

 350

 0,1-40

 4,60

 3120

 

 EZHS140/45

 1400

 450

 0,1-40

 5,40

 3600

 

 EZHS-140/50

 1400

 500

 0,1-40

 5,80

 4200

 

 EZHS-140/60

 1400

 600

 0,1-40

 6,60

 5200

EZHS-160

 EZHS-160/45

 1600

 450

 0,1-40

 5,50

 4400 

 

 EZHS-160/50

 1600

 500

 0,1-40

 6,00

 4700 

 

 EZHS-160/55

 1600

 550

 0,1-40

 7,30

 5600 

 

 EZHS-160/60

  1600 

 600

 0,1-40

 8,80

 6150 

EZHS-180

 EZHS-180/45

 1800

 450

 0,1-40

 7,20

 5300

 

 EZHS-180/55

 1800

 550

 0,1-40

 9,00

 6200

 

 EZHS-180/65

 1800

 650

 0,1-40

 12,60

 7400

EZHS-200

 EZHS-200/45

 2000

 450

 0,1-40

 11,00

 7500

 

 EZHS-200/55

 2000

 550

 0,1-40

 12,70

 8500

 

 EZHS-200/75

 2000

 700

 0,1-40

 14,00

 10000

 
There are two ways to install iron separator:
     
 

1st method: EZHS is installed across the conveyor belt. This method is preferable because iron separator may be located in any place convenient for operation. The disadvantage is the necessity to use iron separators with a larger power consumption for a better extraction of ferromagnetic admixtures from under the stratum of bulk material.  

 

 2nd methodiron separator is installed in the place where the conveyor is unloaded. In this case the ferromagnetic inclusions are captured at the moment of their free fall, which allows an increase in the iron separator operation efficiency and improves the removal of ferromagnetic admixtures with the same power consumption of iron separator.



About our Enterprise » Products » Separator » Self-unloading separator
© 2008 electromagnet.ru